applications ? relay drivers, lamp drivers, motor drivers, ash features ? adoption of mbit processes ? high current capacitance ? low collector-to-emitter saturation voltage ? ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm) ? high allowable power dissipation speci cations absolute maximum ratings at ta=25c parameter symbol conditions ratings unit collector-to-base voltage v cbo 100 v collector-to-emitter voltage v ces 100 v collector-to-emitter voltage v ceo 50 v emitter-to-base voltage v ebo 6v collector current i c 5a collector current (pulse) i cp 7a base current i b 1.2 a collector dissipation p c when mounted on ceramic substrate (600mm 2 0.8mm) 0.9 w junction temperature tj 150 c storage temperature tstg --55 to +150 c package dimensions unit : mm (typ) 7015a-003 ordering number : en6147e product & package information ? package : cph3 ? jeita, jedec : sc-59, to-236, sot-23 ? minimum packing quantity : 3,000 pcs./reel packing type: tl marking electrical connection 3 2 1 cm lot no. tl 1 : base 2 : emitter 3 : collecto r cph3 2.9 0.05 0.4 2.8 1.6 0.2 0.6 0.6 0.9 0.2 0.15 2 1 3 0.95 CPH3212-tl-e n1504 tsim tb-00000305/91003 tskt ta-4228/63003ts ktta-4189/71299ts (koto) ta-1762 no.6147-1/6 62012 tkim/62005ea msim tb-00001408/ http://onsemi.com semiconductor components industries, llc, 2013 september, 2013 CPH3212 bipolar transistor 50v, 5a, low v ce ( sat ) , npn single cph3 stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above t he recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliabili ty.
electrical characteristics at ta=25c parameter symbol conditions ratings unit min typ max collector cutoff current i cbo v cb =40v, i e =0a 0.1 a emitter cutoff current i ebo v eb =4v, i c =0a 0.1 a dc current gain h fe v ce =2v, i c =500ma 200 560 gain-bandwidth product f t v ce =10v, i c =500ma 330 mhz output capacitance cob v cb =10v, f=1mhz 26 pf collector-to-emitter saturation voltage v ce (sat) i c =2a, i b =40ma 100 150 mv base-to-emitter saturation voltage v be (sat) i c =2a, i b =40ma 0.80 1.2 v collector-to-base breakdown voltage v (br)cbo i c =10 a, i e =0a 100 v collector-to-emitter breakdown voltage v (br)ces i c =100 a, r be =0 100 v collector-to-emitter breakdown voltage v (br)ceo i c =1ma, r be = 50 v emitter-to-base breakdown voltage v (br)ebo i e =10 a, i c =0a 6 v turn-on time t on see speci ed test circuit. 32 ns storage time t stg 420 ns fall time t f 28 ns switching time test circuit ordering information device package shipping memo CPH3212-tl-e cph3 3,000pcs./reel pb free v r r b v cc =12v v be = --5v + + 50 input outpu t 24 100 f 470 f pw=20 s i b1 d.c. 1% i b2 i c =20i b1 = --20i b2 =2.5a 50ma 5 4 3 2 1 0 i c -- v ce 0 100 200 300 400 500 i b =0ma 100ma 60ma 70ma 80ma 90ma 10ma 20ma 30ma 40ma it06514 1.0 0.9 0.8 0.7 0.6 0.4 0.3 0.2 0.1 0 0.5 i c -- v be v ce =2v it06516 0 0.2 0.1 0.3 0.4 0.5 0.6 0.7 0.8 0.9 ta=75 c 25 c --25 c collector-to-emitter voltage, v ce -- mv collector current, i c -- a collector current, i c -- a base-to-emitter voltage, v be -- v CPH3212 no.6147-2/6
it06518 h fe -- i c f t -- i c 23 57 23 57 0.01 0.1 1.0 23 57 10 5 7 100 2 3 5 7 1000 v ce =2v ta=75 c -- 2 5 c 25 c 23 23 57 57 1.0 100 10 it06520 2 3 5 7 100 10 2 3 5 7 1000 23 23 3 57 2 55 7 0.01 0.1 1.0 v ce =10v cob -- v cb it06522 2 3 5 7 100 10 2 f=1mhz v ce (sat) -- i c --25 c ta=75 c i c / i b =20 it06524 7 5 3 2 1000 100 7 5 3 2 23 57 0.1 0.01 23 57 1.0 23 57 10 10 25 c collector current, i c -- a dc current gain, h fe collector current, i c -- a gain-bandwidth product, f t -- mhz collector-to-base voltage, v cb -- v output capacitance, cob -- pf collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- mv a s o 1.2 1.0 0.9 0.8 0.6 0.4 0.2 0 0 20 40 60 80 100 120 140 160 p c -- ta 2 2 3 5 7 2 3 5 7 2 3 5 7 10 1.0 0.1 0.01 23 57 23 57 23 57 0.1 1.0 10 100 it06529 it06530 v ce (sat) -- i c it06526 7 5 3 2 2 1000 100 7 5 3 2 23 57 0.1 0.01 23 57 1.0 23 57 10 10 i c / i b =50 -- 2 5 c ta=75 c 25 c v be (sat) -- i c it06528 3 2 7 1000 0.01 23 57 0.1 23 57 1.0 23 57 10 5 3 2 i c / i b =50 ta= --25 c 75 c 25 c 100ms dc operation 100 s 500 s 10ms 1ms i cp =7a i c =5a collector-to-emitter voltage, v ce -- v collector current, i c -- a ambient temperature, ta -- c collector dissipation, p c -- w ta=25 c single pulse mounted on a ceramic board (600mm 2 ? 0.8mm) mounted on a ceramic board ( 600mm 2 ? 0.8mm) collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- mv collector current, i c -- a base-to-emitter saturation voltage, v be (sat) -- mv CPH3212 no.6147-3/6
embossed taping speci cation CPH3212-tl-e CPH3212 no.6147-4/6
outline drawing land pattern example CPH3212-tl-e mass (g) unit 0.013 * for reference mm unit: mm 0.6 2.4 0.95 0.95 1.4 CPH3212 no.6147-5/6
on semiconductor and the on logo are registered trademarks of semiconductor components industries, llc (scillc). scillc owns th e rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. a listing of scillc?s product/patent covera ge may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc ass ume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation sp ecial, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different ap plications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life , or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchas e or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiarie s, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the d esign or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws a nd is not for resale in any manner. CPH3212 ps no.6147-6/6
|
